Make an enquiry

Decal Fitting Guide

To achieve the best results when applying your decals, please follow the steps in our decal fitting guide carefully.

1. Preparation

  • Ensure the surface is clean, smooth, and dry.
  • Remove any wax, grease, or polish using a mild solvent or alcohol-based cleaner.
  • Work in a dust-free environment at room temperature.

2. Application

  1. Position the decal on the surface with masking tape to check placement.
  2. Peel back a small section of the backing paper.
  3. Align the decal and gradually apply, smoothing as you go to avoid air bubbles.
  4. Use a soft cloth or squeegee to press the decal firmly onto the surface.
  5. Slowly remove the transfer film (if included), ensuring the decal remains in place.

3. Aftercare

  • Avoid washing or polishing for 48 hours after application.
  • To prolong the life of your decals, wash gently with mild soap and water.

Disclaimer: Classic Reproduction Decals is not responsible for any damage caused during fitting. If unsure, we recommend professional installation.